Main features：
lPrecision imported ball screw, linear guide, Y-direction grating closed-loop control, high-precision machine for a long time.
lStraight light, ring light two light sources, 70 × - 320 × optional magnification double microscope, a wide range of process adaptation.
lFully automatic loading and unloading, automatic transfer positioning, automatic alignment cutting, automatic tool mark detection, reducing OP workload, and achieving greater machine generation.
pMulti-slice Cutting on the Same Plate;
pVarious automatic alignment algorithms adapted to different processes;
pAutomatic tool mark detection;
pFault self-correction function, multiple locations to implement detection;
pDouble rate dual light source machine vision;
pSubstrate free film to frame cutting function；
pHigh-precision non-contact height measurement；
pFactory automation module；
pBlade breakage detection system;
pConcentrated refueling, convenient self-lubricating function.
Application：
Mainly used for automatic cutting of QFN, DFN, BGA, LED-PCB frame, optical communication devices and other fields. It is suitable for quartz glass, alumina, ceramics, PCB board or package frame and other materials。
Technical indicators：
|
Maximum working size |
mm |
? 12"or 290mm×290mm square |
||
|
Xaxis
|
Machinable range |
mm |
310 |
|
|
Feed speed input range |
mm/s |
0.1 - 600 |
||
|
Yaxis
|
Machinable range |
mm |
310 |
|
|
Single step intake |
mm |
0.0001 | ||
|
positioning accuracy |
mm |
0.003 within/310, 0.002 two with in/5 |
||
|
Zaxis
|
Effective travel |
mm |
40(?2 "When cutting the blade) |
|
|
Mobile resolution |
mm |
0.00005 |
||
|
Repetition precision |
mm |
0.001 |
||
|
Maximum cutting blade diameter for use |
mm |
? 58 |
||
|
Theta axis |
Maximum angle of rotation |
deg |
380 |
|
|
|
Angle accuracy |
″ |
15 |
|
|
principal axis
|
Rated output power |
kW |
1..8(or 1.5、2.4) at 30,000 min-1 |
|
|
Rated torque |
N?m |
0.48 |
||
|
Rotation number range |
min-1 |
3,000 - 60,000 |
||
|
The maximum framework to be used |
- |
12 inch or 290mm×290mm square |
||
|
Other Specifications
|
Power Supply |
v |
Three-phaseac380v±Ten％ In addition to the above, the transformer needs to be configured |
|
|
Power consumption |
Processing time |
kW |
1.2(reference value) |
|
|
Warmer time |
kW |
1.0(reference value) |
||
|
Max Power consumption |
kVA |
5.0 |
||
|
Compressed air supply pressure |
Mpa |
0.5 - 0.8 |
||
|
Maximum compressed air consumption |
L/min（ANR） |
220 |
||
|
Cutting water pressure |
Mpa |
0.5 - 0.8 |
||
|
Maximum consumption |
L/min |
4 |
||
|
Cooling water pressure |
Mpa |
0.2 - 0.4 |
||
|
Maximum consumption |
L/min |
3.0 ( in 0.3 MPa ) |
||
|
Exhaust air volume |
mThree/min |
1.5 |
||
|
Equipment size (W×D×H） |
mm |
1,400×1,200×1,800 |
||
|
Equipment weight |
kg |
about 1,000 |
||
Conditions of use:
1. please set the machine in a 20~25 C environment (the range of fluctuation is within + 1 c); the indoor humidity is less than 80%, and there is no condensation.
2. please use the air pressure dew point below -15 C, the residual oil is 0.1ppm, the filtration degree is above 0.01um/99.5, clean compressed air.
3., please control the water temperature of the cutting water at room temperature of +2 C (within the range of + 1 c), and the water temperature of the cooling water is the same as that of the room temperature (the fluctuation range is controlled at + 1 degrees Celsius).
4. please avoid the gravity impact of the equipment and any vibration threat from the outside world. In addition, please do not install the equipment near the blower, the vent, the high temperature device and the oil producing device.
5. please install the equipment in a waterproof floor and a place with drainage treatment.
6. please do the operation in strict accordance with the instructions of the company's products.
ChangShu：
TEL：+86-512-5296-9660
PHO：+86-139-1043-2532 Sam Yang
ADD：Changshu Economic & Technological Development Zone
Email：jcxj_support@163.com
Web：http://www.0464idc.com
