Application:
12 inchIC、PCBCeramics, glass, lithium niobate, alumina, quartzPrecision cutting of such materials; widely used.IC integrated circuit(8-12inch)、LEDEncapsulation,QFN、DFN、BGAOptical optoelectronic, communicationAnd other industries.
Advanced function:
? The multi point automatic recognition algorithm is used to solve the problem of inaccurate markings caused by the frame deformation, and to realize the accurate processing.
? Many pieces are processed by optimizing the custom worktable and frame.
Technical indicators:
|
Maximum working size
|
mm
|
island 12 "or300mm×300mmsquare
|
|
Xaxis
|
Machinable range
|
mm
|
Three hundred and ten
|
|
Feed speed input range
|
mm/s
|
0.1 - 600
|
|
Yaxis
|
Machinable range
|
mm
|
Three hundred and ten
|
|
Single step intake
|
mm
|
Zero point zero zero zero one
|
|
positioning accuracy
|
mm
|
Zero point zero zero threewithin/310(single error)Zero point zero zero twowithin/5
|
|
Zaxis
|
Effective travel
|
mm
|
40(Use?2 "When cutting the blade)
|
|
Mobile resolution
|
mm
|
Zero Point Zero Zero Zero Zero Five
|
|
Repetition precision
|
mm
|
Zero point zero zero one
|
|
Maximum cutting blade diameter for use
|
mm
|
shown 58
|
|
Theta axis
|
Maximum angle of rotation
|
deg
|
Three hundred and sixty
|
|
|
Angle accuracy
|
″
|
Fifteen
|
|
principal axis
|
Rated output power
|
kW
|
One point eight（One point five、Two point twoOptional)at 30,000 min-1
|
|
Rated torque
|
N?m
|
Zero point four eight
|
|
Rotation number range
|
min-1
|
Three thousand～Sixty thousand
|
|
The maximum framework to be used
|
-
|
TwelveInch or300mm×300mmFrame frame
|
|
Microscope system
|
-
|
Two sets of different magnification microscopes
|
|
Other
Specifications
|
Power Supply
|
v
|
Three-phaseac380v±Ten％
In addition to the above, the transformer needs to be configured
|
|
Power consumption
|
Processing time
|
kW
|
Zero point nine(reference value)
|
|
Warmer time
|
kW
|
Zero point eight(reference value)
|
|
Max Power consumption
|
kVA
|
Four point five
|
|
Compressed air supply pressure
|
Mpa
|
0.5 - 0.8
|
|
Maximum compressed air consumption
|
L/min（ANR）
|
Two hundred
|
|
Cutting water pressure
|
Mpa
|
0.2 - 0.4
|
|
Maximum consumption
|
L/min
|
Four
|
|
Cooling water pressure
|
Mpa
|
0.2 - 0.4
|
|
Maximum consumption
|
L/min
|
One point five(in0.3MPaWhen)
|
|
Exhaust air volume
|
mThree/min
|
One point five
|
|
Equipment size (W×D×H）
|
mm
|
Eight hundred and fifty×Nine hundred×One thousand and nine hundred
|
|
Equipment weight
|
kg
|
aboutNine hundred
|
Conditions of use:
1. please set the machine in a 20~25 C environment (the range of fluctuation is within + 1 c); the indoor humidity is less than 80%, and there is no condensation.
2. please use the air pressure dew point below -15 C, the residual oil is 0.1ppm, the filtration degree is above 0.01um/99.5, clean compressed air.
3., please control the water temperature of the cutting water at room temperature of +2 C (within the range of + 1 c), and the water temperature of the cooling water is the same as that of the room temperature (the fluctuation range is controlled at + 1 degrees Celsius).
4. please avoid the gravity impact of the equipment and any vibration threat from the outside world. In addition, please do not install the equipment near the blower, the vent, the high temperature device and the oil producing device.
5. please install the equipment in a waterproof floor and a place with drainage treatment.
6. please do the operation in strict accordance with the instructions of the company's products.
